Mahogany wood drying process

The raw materials of mahogany furniture are relatively expensive. Experts pointed out that in mahogany drying, the quality of drying and the reduction of losses should be the primary considerations. To achieve these two points, scientifically mastering the drying process is the most important prerequisite.

Fresh mahogany wood contains a lot of moisture, and the water will evaporate under certain circumstances. The natural evaporation of moisture will lead to wood shrinkage, cracking, bending deformation, mildew and other defects, seriously affecting the quality of wood products, so the wood must be dried before processing mahogany furniture. If it is improperly dried, various problems will arise in subsequent parts processing, assembly and painting, which will affect the quality of the finished product. The correct drying treatment can overcome the above wood defects, increase the mechanical strength of the wood, improve the processing performance of the wood, and extend the service life. It is an important technical measure to rationally use and save wood, and it is an indispensable and important process in wood processing and production.

The mahogany furniture special top mahogany black rosewood, Vietnam pear and lobular red sandalwood are hardwood hardwood. The moisture in the mahogany wood moves very slowly. The moisture in the wood is not smooth, so the surface and the lower part The moisture content of the layers varies greatly. During the wood drying process, in order to increase the drying speed of the wood, eliminate the stress during the drying process, and reduce the gradient of moisture content, the final moisture content of each plate of the balance bar pile needs to be preheated separately. Intermediate, balance, and end processing are multiple times.

The external factors that affect the wood drying of rosewood sofa are the temperature and humidity of the drying medium, the circulation speed of the airflow through the wood surface and the pressure of the medium; the internal factors are mainly the species, the thickness of the dried wood, and the initial moisture content. In the case where the drying equipment in each part of the drying room can ensure normal working conditions, the wood drying process conditions are the key to ensure the wood drying cycle and the quality of wood drying.

The mahogany tea chess chair wood drying benchmark is one of the important basis for guiding the dry production of wood. The wood species of rosewood are relatively single, and after understanding and mastering the dry quality and final moisture content required for dried wood, it is possible to choose the appropriate drying process conditions. The core content is to select the drying reference and determine the heat and moisture treatment conditions according to the species and thickness of the dry wood. In the premise of ensuring the quality of wood drying to increase the drying speed, save energy consumption, reduce drying costs, resulting in the greatest economic benefits.

The core content of the wood drying process conditions is the wood drying benchmark. The softness of the drying benchmark basically determines the wood drying cycle and the quality of the wood drying. Therefore, the phenomenon of cracking, deformation and uneven moisture content of the wood during the drying process belongs to the following: Wood drying defects caused by wood drying. Cracking is also called dry cracking. It includes end cracking, surface cracking, and internal cracking; deformation includes smooth bending, horizontal bending, curling, and twisting.

The use of modern drying technology to study and improve the quality of dry mahogany furniture, and improve the quality of mahogany furniture, is crucial for stabilizing and expanding the market share of mahogany furniture in the international and domestic markets. It is of great significance to carry forward the development of mahogany culture and promote the development of traditional Chinese furniture. Researching and improving the quality of dry wood for mahogany furniture is a basic technical input necessary for the further development of mahogany furniture companies and a prerequisite for capacity building.