The first trick: look at the nose
The machine head is the heart of the mechanical operation, and the needle parts such as the needle selector, the triangle, the electromagnet, and the eye move the needle. The core of the machine head is the triangular bottom plate. When the triangle plate is used properly, the lifting speed and lifting frequency of the needle raising triangle can be increased, the damage rate of the knitting needle can be reduced, and the adjustable range of the fabric density can be widened to improve the weaving quality of the fabric. . At present, domestic triangular production enterprises are limited by materials, heat treatment, cryogenic treatment, manufacturing, etc. It is difficult to compete with imported equipment. If the toughness of the triangular bottom plate is not enough or the process is not up to standard, it will cause problems such as striker and fabric deformation, which will seriously cause machinery. Wear, deformation, blackening. However, it is gratifying that the national enterprises are still fighting for strength. For example, the quality of the triangular plates in Shantou Lianxing, Taiwan, Zhejiang and other places is not bad. Their materials and processes are basically up to standard, but due to the difficulty of materials and process treatment, Lianxing and Taiwan The production capacity can not meet the market demand, the monthly output is not enough, and the relative price is relatively high, so the supply is relatively short. For the selection of the triangular plate, attention should be paid to its material parameters and precision parameters to see the smoothness, tightness and flatness of the triangular plate. Tightness refers to the gap between the triangle block and the grid. The smaller the gap, the better (tight) the better. The flatness can be seen whether the grid is distorted or not, which can be observed by the naked eye. In general, the products that the industry praises will not be too bad.
The second measure: look at the system
The computer system should be the brain of the whole machine, which can be imagined. This metaphor shows the importance of the computer. If the computer instability is definitely the sin that affects the production and quality of sweaters, all the movements, patterns, speeds, and densities must be controlled by computers. The computer selection can not be sloppy. I have personally seen some computers doing the machine. The head and the shaker flew, the yarn feeder was messed up, the needle was moved a few times, the code was loose, the crash, and the mess was running, it was terrible! Imported machines have always been recognized as stable, but now domestically produced machines are not bad. It is said that domestically produced systems started in 2001. Before 2001, it was basically a situation of “big roads through the sky, importing and escapingâ€, and the actual level of foreign mechanical and electrical integration. It is indeed better than the people of the country. However, the progress of domestically produced computers is not slow. The Chinese people have fully exerted the high-level wisdom of "bringing the doctrine". At first, they basically relied on imitation. Later, they began to innovate independently. In less than ten years, the technical level was approached step by step. It’s sweating. It’s said that the blue is better than the blue. It should be said that the domestic computer has a qualitative change compared with eight years ago. At present, the domestically-made machine can be regarded as the Hengqiang computer in Hangzhou. There are more than 80% of users in China, and the big manufacturers are basically using it. The waste rate and the waste rate are relatively low, and it is still stable. The normal speed can be opened to 0.9, the imported machine is 1.0, and other domestic brands are as fast as 0.8. The operation of Hengqiang system is relatively simple, the maintenance is relatively easy, and the employment is better. This aspect is slightly better than the imported machine. It seems that the national enterprise is still very competitive. However, the price of Hengqiang computer is higher than that of other domestic systems. It is said that the price of the whole machine is the same regardless of the computer installed in the third or fourth thousand. There are also a small number of machinery factories posted "dog skin plaster". I heard that there are pirated Hengqiang systems on the market, and they are sold in the market after the change of face. The low-quality domestic computers are going to the market. This may be the source of misunderstanding of some domestic machines. Look at the computer mainly depends on how much speed can be opened, whether the operation is simple, whether the flower type action (jacquard, intarsia, and needle turning) is comprehensive and the software error rate is much. Efficiency is money, speed is fast, there are fewer mistakes, and the function is full. This is money.
The third measure: look at the needle board
The needle plate should be regarded as the torso of the flat knitting machine. It is also limited by the materials, heat treatment, process, manufacturing and other techniques. If the needle plate is not used properly, the fabric will be rough, the plate will be worn, the needle will be hit, and even the needle plate will be black and fester. Fabrics that are not well woven will go away. At present, the domestic reputation is better in the needle board of Wenzhou Baixin and Changshu. There are usually two kinds of needle plates in China: one is a slotted needle plate, and the other is a horn pin plate. At present, many manufacturers use a slotted needle plate to reduce the cost. When you purchase, look at the needle plate. When you look at the smoothness of the needle groove, look at the flatness of the whole plate. This is generally touched by hand and observed with the naked eye. The needle plate of the good needle plate is smooth and has no meat. When viewed with the naked eye on the horizontal line, the whole plate is flat and does not deform.
The fourth measure: look at the knitting needle
The knitting needle is the finger of the flat knitting machine. The warp and weft knitting of the yarn depends on it. In addition to the material toughness of the knitting needle, the design and precision of the needle hook of the needle are also very different. Domestic needles, useful for imported needles, the representative of the import is: Groz, Aka, Hite, these needles are still "tested", the waste needle rate is very low, the domestic needle needle rate is relatively higher . Groz, Aka, Hite, etc. may be the best needle brand. The proportion of needles used in the circular machine industry is still relatively large, so its quality can be seen. The price of these "Shanghai style" needles is not low, the average price is 4-6 yuan per piece. If the needle selection is not good, it will lead to bad edges, waste tablets, missing needles, broken needles, etc., so don't underestimate these small knitting needles. Although things are small, it is a big trouble to choose. In a certain sense, the knitting needle is also a consumable item. In the knitting process, it is inevitable to rate a few needles, so reducing the needle rate should also be considered.
The fifth measure: look at the service
Mechatronics equipment will inevitably have problems, Stoll should be one of the best equipment in the industry, but there will also be common faults such as crashes, frequent failure of the pulling system, and damage to the scissors, so no matter what machine is not " "The golden bell", there must be a bad time. Our industry is most afraid of the machine stopping, and the output will be damaged in one hour. Especially in the peak season, the profit is basically calculated according to time. The service time is too long to lose the real money. Therefore, after-sales service is still very important in the current industry environment. Look at the service, mainly when looking at the equipment manufacturer's staff configuration when buying the machine, especially to observe the dealer's staffing configuration, most of the flat knitting machine manufacturers in Jiangsu and Zhejiang, the resident sales department (some are business) is the first-line service The organization, so be sure to understand the local dealer structure, see if there is a version of the master, see how many mechanics, see how many service vehicles. At the time of the inspection, attention should also be paid to the management of the company. There are a lot of mechanics who are recruited by the dealers. After one or two months of training, they will be pulled out for sale. The horses will be tempered by the hands and the money will be worn away. In the end, they will not be solved. When purchasing the machine, it is best to ask the dealer to give a detailed introduction to the background of each mechanic, the number of years of work, and the proficiency of the technology.
Sixth trick: look at the background
This is very important. There are two types of flat knitting machine manufacturers: one is the manufacturer of needles and spinning machinery equipment; the other is the former industry. I have heard that there are construction companies in the industry, and there are advertising companies. It is not that the equipment for switching jobs is not good, but the interlacing is like a mountain. Most enterprises that switch to flat knitting machines are copying equipment from other manufacturers. The drawings were repaired and revised by the East, and finally changed to four. Or let someone else's assembled equipment put on their own brand and sell it. I heard that some computer companies are also letting others do the OEM. This kind of assembly and labeling equipment is different because of the assembly factory, the parts are not uniform, for several years. After that, it is possible to find a matching part, and the long-termness of the accessory should be considered. We can't be tested, and it's better to use this copy of the "work". The threshold for the flat knitting machine industry is still relatively high. The requirements for capital and talents are quite high. Some experts have said that there is no tens of millions of funds in the flat knitting machine manufacturing industry, and there are some industry experiences that are not short-lived. The mechanic master specializes in "gunners" and takes the copy as the main. There are very few people who have the ability to develop independently. We are still good at empiricism. It is necessary to understand the financial strength, industry background and developer background of the company. Most of these large companies such as Cixing, Dawei, Yuefa, and Hualun Feihu were formerly born in the industry and should be able to rely on them.
Seventh trick: look at the version of the software
There are many kinds of pattern-making software, the most common ones are: Picasso, Sima, Hengqiang, M1. The function of the pattern-making software is basically the same. It mainly depends on which type of software used in this industry is used by many people. According to my understanding, Picasso and Sima's pattern-making software has entered the country earlier. This type of pattern-making master is not difficult to recruit, and there are many people. . Hengqiang's pattern should be used more now. It is similar to Picasso's operating habits, but there is still an advantage in the speed of the drawing. Many scary files can be directly retrieved, such as Yijia and Sakura brand software. Scared. When doing the pattern, it is much faster than Picasso. The files of Sima, Picasso and M1 can basically be used in Hengqiang's software. The operating habits are similar to that of Picasso, so the employment is still very good. When buying a flat knitting machine, be sure to ask clearly what type of file the computer supports. It is best to try the sample on the machine and blow it well.
Eighth trick: see the employment penetration rate
It is not advisable for sweater factories to rely excessively on the after-sales service of computerized flat knitting machine manufacturers without cultivating their own mechanics team, because the after-sales service team of computerized flat knitting machine manufacturers cannot stay in the sweater factory forever. Therefore, it is necessary to establish a machine repair team belonging to its own factory after the pre-sale training of the flat knitting machine manufacturers, so that the machine failure can be solved at any time. Therefore, we must consider clearly when purchasing the flat knitting machine. It is not that the more considerate the after-sales service is, the better. The key is to look at the pre-job training. The quick way is to recruit some skilled workers, computer operators and pattern makers are still easy to solve, the imported machine needless to say, because the early employment is still quite sufficient, the mechanics are a little more difficult. Domestically, it is almost the same, most of the operating systems are constant and strong. After all, their penetration rate is there, and operators and technicians are relatively abundant. If you can't find a skilled worker, you should ask for pre-job training before you buy the machine and learn about their training methods. The competition among technicians is also very fierce. Therefore, individuals will definitely retain a little bit of technical preaching. It is best to let them provide some technical information, such as machine repair information, computer operation instructions, etc., so that at least when there is no way, they can explore for themselves. .
The ninth trick: choose the model, it is suitable
Whether it is suitable for your own goods, such as the thick or thin needles, the thick needles must consider the dual system, because there are many types of flowers, and the efficiency is high, the efficiency of a single system is basically incomparable. If it is a fine needle, it can be compared in many aspects. It is done on one side or in a twisted flower. The pattern does not need too much, and the single system is considered for running. If it is not too tight, it is recommended to use a dual system, the price is similar. From the perspective of long-term development and actual interests, the dual system is still quite advantageous.
Some people will compare the domestic machine and the imported machine. Those who have done this industry will count, the domestic machine returns to the book for two years, and the imported machine returns to the book for four years. Each has its own advantages. How do you understand the current domestic machine? After so many years of development, the domestically produced machines can basically meet the shipping requirements. We have 30 domestically produced machines, which are used well.
Protect your infield, outfield, diamond or entire field with field covers and tarps from Shuangdun Tarpaulin. We offer sport cover for specific areas like pitching mounds, bases and plates, as well as full field and infield tarps that will ensure your field is game ready all year. We offer standard field covers that can be held down with sandbags or with stakes, and weighted field covers that have a weighted hem and do not require anything extra to stay in place.
Sports Field Cover, Football Field Cover, Baseball Field Cover
Ningbo Shuangdun Tarpaulin Trade Co.,Ltd , http://www.sdtarpaulin.com